1" 4 Stroke Gasoline Powered Water Pump Gasoline Pull Start Transfer Irrigation Pump 38CC 1200W Portable Gasoline Engine Transfer Pump, for irrigation pond, landscape or garden irrigation

Product Description:WP 10-140F portable four-stroke gasoline engine water pump pump is suitable for garden lawn watering, field pumping, drainage operations, clothing crops, green seedlings, irrigation and fertilization, etc.Product parameters:Model: WP 10-140FEngine model: 140F-3Engine type: single-cylinder, air-cooled,four-stroke gasoline engine.Engine displacement: 38ccMaximum power and speed: 1.2kw, 8500r/minFuel tank volume: 650mlEngine oil tank volume: 80mlMaximum suction range: 7mMaximum lift: 30mSuitable water pipe size:Water pump inlet: 1” (25mm)Pump outlet: 1” (25mm)Flow rate: 8000L/hourGross/net weight: 10kg/8.2kgPacking size: 38x35x30cm/14.96*11.81*13.78inProduct size: 36*28*32cm/14.17*11.02*12.60inStart mode: pull startFeatures:1. Equipped with four-stroke 140F-3 new power, super easy to start2. Low fuel consumption, stable performance, long service life and low failure rate3. Small size, light weight, convenient transition and simple operation4. Low noise, low emissions and no pollution5. High speed, parallel conveying>100MUse and maintenance:1. First use: Choose genuine four-stroke gasoline engine oil and add it to the engine oil tank, about 80ml. Replace it every 100 working hours in the future.2. Fill the fuel tank and engine oil tank with gasoline and engine oil respectively. Turn on the oil circuit switch,3. Open the water filling cover above the water pump. Fill up the water diversion, use the card link to connect the water inlet pipe (note that all connections of the water inlet pipe cannot leak. Air leakage will cause the water to be unable to absorb).4. Close the damper and pull the starter. After starting, open the throttle and increase the throttle to start working.(If there are signs of starting but failed to start, please open the damper and continue to pull the starter)5. Good use and maintenance habits. It will make your machine work more efficiently.Note: After each work, run at idle speed for 2-3 minutes, and turn off the engine after the engine temperature drops to increase the service life.packing list:1x water transfer pumpHose clamps and accessoriesEnglish user manual

• 🔥【High quality material】 Powerful 43CC 1.7HP engine with built-in solid alloy pump and impeller. Pump is made of non-corrosive marine grade aluminum and alloy hose fittings. Smooth running double ring / double balance crankshaft with extra wide base for stability. Excellent engine design, corrosion resistant, wear resistant and low heat.
• 🔥【Perfect for emergency use】The gas engine on the pump makes the transfer pump ideal for use during power outages and at remote work sites for garden lawn watering, field pumping, drainage operations, clothing crops, green seedlings, irrigation and fertilization, etc.
• 🔥【High efficiency】 Engine type: single-cylinder, air-cooled, four-stroke gasoline engine; Engine displacement. 38cc; Maximum power and speed: 1.2kw, 8500r/min; Maximum suction range. 7m; Maximum head. 30m; Pull recoil starting system makes starting super easy. Small size, light weight, easy transition.
• 🔥【High efficiency & easy to operate】 1'' BSP screw type inlet/outlet, base drain plug, easy to remove excess water and impurities from the pump before starting. High efficiency and low oil consumption. Equipped with oil shortage alarm device, which can prevent machine damage. Fast starting speed, simple starting method, easy to operate, safe and stable.
• 🔥【Shipping】: Our products are sent out from the US warehouse on the same day after purchase, please recognize juckeyroot for purchase, thank you.