110V-220V AC Artnet Ethernet to SPI Pixel Controller 4 Ports 4096 Pixel h802ra Supports MADRIX Jinx Suitable for WS2811

controllerDimmersfeature:(1). Support Art-Net protocol 4 universes (512 channels per universe) output.(2). Supports DMX512 chips (such as UCS512 TM512) to assign addresses.(3). Controlled by main controller or PC.(4). The transmission distance between two controllers can be up to 100 meters.Specification:Input voltage: AC90-240VPower consumption: 1.3WNumber of driven pixels: 4096 pixels.Weight: 1KGDimensions: length 163×width 155×height 54Carton size: L205 x W47 x H21Package Included:1 H802RA controllerSupport chip:DMX512 LPD1882 LPD8806 LPD1882 LPD1889 TM1812 TM1809 TM1804 TM1803 TM512 TM1926 TM1913 TM1914 TM1814 UCS6909 UCS6912 UCS1903 UCS1909 UCS1912 UC S512 UCS8904 APA104 P9813 WS2801 WS2803 WS2811 WS2812 WS2821 SM16716 SM16711 INK1003 LX1003 MY9221 MBI6021 MBI6024 LD1510 LD1512 LD1530 LD1532 etc.Note: H802RA supports more than the chips listed above (for example UCS2903 and UCS1903 have the same timing diagram H802RA supports both).Operating mode:(1). Connect to the main control the software is LED Build. The program is stored on the SD card.Basic workflow of MADRIX:Pre-MADRIX configuration (if using other software these configurations are also essential)(1). Connect H802RA to PC and assign an IP address to H802RA.(2). Open LED Studio click "Settings" - "H802RA Settings" and the following dialog box will pop up.notes:(1). "DMX512" includes UCS512 WS2821 and TM512.(2). "TM1812" includes P9883 TM1804 TM1809 UCS1903 UCS1909 UCS1912 WS2811 WS2812 SM16703 SM16709 SM16712 INK1003 LX1003.Generally if "DMX512" is selected the clock should be "250K" if "TM1812" is selected the clock should be "750K".MADRIX configurationAssuming you connect an H802RA to a PC each universe controls 170 WS2812 pix

• controller
• Dimmers