6 Pack Landscape Paver Edging, 7.8'x 1.87" Black

Installing before pavers: Place PAVER RAIL on top of uniformly compacted graded gravel base per pavement design and stake edging using the 10" edging staples supplied (10"x3/8" landscape spikes may also be used). Installing after pavers: Use a hand trowel to carefully pull back screeded sand from the edging area. Place PAVER RAIL firmly against the pavers using the 10" edging staples supplied (10"x3/8" landscape spikes may also be used). Joining sections: Join sections by using a staple to adjoin the pieces. As shown in diagram (a). Fastening: Support the staple (b) and lightly tap the staple in part way to accommodate for edging adjustment, if needed. When finished adjusting, tap in the staples tight to the edging. Space remaining staples every 12"-24" apart or as needed on curves. When backfilling with a non-compactible material, more staples may be required for added support. To finish: After all pavers are in place, sweep surface to remove all debris. Using a plate compactor, make multiple passes over the entire area to set pavers. Sweep SRW Polymeric Sand into joints until the joints are filled. Alternate compacting and sweeping sand into joints until the joints are solid. Backfill the outside of edging with top soil, sod, seed or mulch. To clean and seal pavers use SRW Paver Seal and cleaner products available from your local SRW dealer.

• Permanent and invisible barrier between hardscapes and other landscape materials
• Product height 1-7/8"
• Best all-around product
• Straight and curved applications