7.3inch E Ink Full Color E-Paper Display Spectra 6 (E6) E-Ink Display Low Power Consumption 800×480 Pixels SPI Communication Optional for E-Paper Driver HAT

Features:Adopts E Ink Spectra 6 (E6) technology, featuring high contrast and high color saturationNo backlight, keeps displaying last content for a long time even when power downUltra low power consumption, basically power is only required for refreshingComes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/RDK X3/Arduino/STM32)Optional for e-Paper Driver HAT:With standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards/Jetson Nano/RDK X3Adapting SPI interface for connecting with controller boards like Raspberry Pi/Jetson Nano/RDK X3/Arduino/STM32, etc.Onboard voltage translator, compatible with 3.3V / 5V MCUsSpecifications:Resolution:800 × 480 pixelSViewing angle:>170°Display dimensions:170.20 × 111.20 × 0.91mmDisplay color: E6 full color(E Ink Spectra 6)Full refresh time:12sInterface: 3-wire SPI, 4-wire SPIOperating voltage:Raw display: 3.3V e-Paper Driver HAT: 3.3V/5VGrey scale:2Display area:160 × 96mmRefresh power:<70mW(typ.)Dot pitch:0.2 × 0.2mmStandby current:<0.01uA (almost none)Suitable for price Tags, asset/equipment Tags, shelf labels, conference name tags...Onboard SPI Control Interface:VCC: 3.3V/5VGND: GroundDIN: SPI MOSI pinCLK: SPI SCK pinCS: SPI chip selection, low activeDC: Data / Command selection (high for data, low for command)RST: External reset, low activeBUSY: Busy status outputE Ink Spectra 6 technologyE Ink Spectra 6 is a newly launched full color e-paper technology that brings fresh vitality to the e-paper industry with excellent color performance, high resolution and high contrast.Adopts red, yellow, and blue as the primary colors, it offers more possibilities for e-paper color display, featuring high contrast and high saturation to make images clearer and colors brighter.Packing List:7.3inch e-Paper (E) x1e-Paper Driver HAT + Adapter board + FFC cable x1PH2.0 8PIN cable x1RPi screws pack (2pcs) x1

• This e-Paper display with driver board added. Compatible With Raspberry Pi Series Boards, Jetson Nano
• Adopts E_Ink Spectra 6(E6) technology, supports 6-Color display. No backlight, keeps displaying last content for a long time even when power down
• Ultra low power consumption, basically power is only required for refreshing. Onboard voltage translator, compatible with 3.3V / 5V MCUs
• With standard Raspberry Pi 40PIN GPIO extension header, Adapting SPI interface for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
• Wiki resources is showed in item detail page. If you need more information online (examples for Raspberry Pi/STM32), please contact us by message:)