AEMC CA7027 Fault Mapper Pro Telephone Cable Tester with Graphical TDR

The Fault Mapper Pro is a hand-held graphical TDR (Time Domain Reflectometer) designed for identifying and locating faults on power and communication cables, given access to one end only. The Fault Mapper Pro measures cable length and indicates the length and distance to cable faults to a range of 9' (3m) to 19,000' (6000m) on virtually any type of cable. It injects a series of pulses into the cable under test. The velocity at which the pulses travel is determined by the type of cable, which is known as the velocity of propagation (Vp) of the cable. The Velocity of Propagation (Vp) is adjustable between 1 percent and 99 percent enabling accurate calibration to the cable under test. The Vp value is expressed as a percentage of the speed of light (e.g. 67 percent or ft/mtrs/micro-second), this value will vary according to the type of cable under test. The Fault Mapper Pro can accept user selectable values between 1 and 99 percent (or the equivalent value in feet or meters per micro-second). Based on the selected Vp and the time taken for the pulses to travel through the cable, a reflection profile of the cable under test is displayed. An adjustable cursor assists in locating faults and termination. The Fault Mapper Pro incorporates an oscillating tone tracer, which is detectable with a standard tone tracer, for use in the tracing and identification of cable pairs. Determine length of cable runs. Find cable faults and the distance to them. Determine degradation of cables due to moisture and other contaminants. Trace and identify cables. Determine telephone cable connections and the length to them. Ranges at Vp equals to 70 percent: 23, 49, 98, 197, 394, 820, 1640, 3280, 6560, 9850, 19000 feet. Range selection: manual range control. Accuracy: +/-1 percent of range. Minimum cable length: 1.5'. Safety Rating: IEC61010-1; EN60950. Protection Degree: IP54. Electro-Magnetic Compatibility: EN61326-1. CE Approved, Compliant with current EU directives.

• 11 range scales indicating cable faults and terminations up to 19,000 ft (6000m) in feet or meters, identifies impedance mismatches
• Detects opens, shorts, taps, faulty taps, bridge taps, splitters, high resistance, wet cables, splices and more
• Works with twisted pair, parallel and coaxial cable; selectable cable impedance (25 ohm, 50 ohm, 75 ohm, 100 ohm)
• Over-voltage protection up to 250V, adjustable cursor assists in locating faults termination
• Built-in tone generator for tracing and locating cables, large high-visibility blue electroluminescent backlit display