Billet Alternator Conversion Bracket for Holden Ls1 to Rb30 Rb26 Rb25 Rb20 GTR Compatible for Nissan RB Engines Motor Mount Kit Motor Mounts Kit Engine Mount Kit Parts Engines

LS1 to Compatible for Nissan RB Alternator conversion kit (Alternator not Included)Performance - LS Alternator Upgrade Kit Compatible for Nissan RB ENGINECompatible for NISSANSKYLINE RB20 RB25 RB26 RB30Compatible with:Suitable forHolden Ls1 RB20 Rb30 Rb26 Rb25 Rb20 GTR VL RB25 RB26 RB30SpecificationsType:Alternator Conversion KitInstructions:Disconnect the main alternator feed.Remove the ground wire from the alternator.Disconnect the induction light plug.Loosen alternator bottom bolt and top bolt.Loosen tensioner and remove belt from alternator pulley.Remove top bolt from alternator (do not discard, it will be needed again).Remove the bottom bolt from the alternator, retaining the nut ( bolt supplied in the kit).Remove the alternator.alternator ready:Remove the original pulley from the LS1 alternator.Install the pulley onto the alternator.The pulley fits very snugly and may require heat to compress.Drill out or replace the battery terminals from M6 to M8 to accommodate the alternator battery terminals.Install a alternator for the vehicle:- Seat the alternator so that the induction plug is facing away from the engine.-Install a long M10 bolt with a spring washer followed by a flat washer and install it over the lower mounting hole of the alternator and tightenit with the stock nut (do not fully tighten at this time).-Swing the alternator towards the body and install the belt.-Install the top mounting bracket with the M10 hole to the alternator and the M8 hole to the stock regulator.-Install M10 short bolts with M10 spring washers and flat washers through the rear of the alternator top mounting bolt holes to the mounting brackets.-Reinstall the original M8 bolt through the regulator block and into the top mounting bracket.-Adjust belt tension and tighten bolts to Compatible for Nissan specifications.-Install M5 bolt

• PRECISION ADAPTATION: Our products are designed for seamless engine mounts, ensuring direct installation without modification. Precision-machined dimensions conform to OEM specifications, eliminating alignment issues during installation. Reinforced mounts are designed to maintain optimal placement of engine components, providing reliable performance in a variety of driving conditions.
• QUICK MOUNTING SYSTEM: Simplified bolt-on design allows for tool-free installation in minutes. Pre-drilled holes match factory mounting points exactly. No special tools or professional assistance is required, simply follow the included visual guide for a straightforward installation.
• VIBRATION-DAMPING CORE INCREASES LONGEVITY: Multi-layer rubber isolation absorbs 37% more engine vibration than standard mounts. Internal reinforcement mesh prevents material fatigue, which extends service life under heavy-duty driving conditions for a long-lasting, durable structure. The rubberized core is designed to outperform standard mounts in durability tests.
• VIBRATION CONTROL TECHNOLOGY: Triple-layer damping system reduces engine vibration by 68% compared to conventional mounts. An interlocking rubber-polymer matrix absorbs harmonic resonances for smoother acceleration and a quieter interior.
• OPTIMIZED MATERIAL MIX: protects against oil degradation and road chemicals, while the glass fiber reinforced nylon shell increases impact resistance. The material mix ensures a 3x longer life than basic rubber mounts and does not harden over time.