BOESHIELD T-9 Rust Protection/Lubrication (1 Gallon) and Boeshield RustFree Rust Remover (8 oz)

BOESHIELD T-9 Rust & Corrosion Protection/Inhibitor and Waterproof Lubrication, 1 Gallon JugOn a seafaring yacht, a dusty ATV, or a shower door, T-9 has you covered. Boeshield T-9 endures muddy bike trails, rain-soaked back roads, and salted highways. It withstands farmer’s fields, offshore oil rigs, and carpenter's workshops. For everyone from firefighters and road crews to cyclists and sailors, Boeshield T-9 is the proven solution. T-9 attacks existing corrosion, loosens rusty parts, and flushes out old lubricants. It is also extremely useful for drying wet parts, electrical motors and circuits, ignitions, and connectors. Apply T-9 and wipe off the excess for immediate use. T-9 dries to a waxy, waterproof finish without leaving a sticky film to attract dirt, dust, or mud. T-9 stays liquid long enough to permeate metal crevices and seep deep inside assembled components to leave a durable protective coating as well as lubricating and protecting-all without dismantling your equipment. Apply T-9 to any metal surface and let it dry. One simple step gives you a thin, penetrating film of durable, waterproof protection and lubrication that endures, months after month or mile after mile. T-9 dries to a clean, waxy, waterproof film that won't wash off in rain, puddles, or mud. You can rinse away sand, dust and grime with water, while leaving the lubricant intact. T-9 will not harm paint, plastic, rubber, fiberglass, or vinyl. It can be used on engines, wiring, and belts. T-9 is nonconductive and will not cause short circuits, so it's also safe to use on electronics. Use solvent or any emulsifying cleaner to easily remove T-9, or simply respray and allow T-9 to dissolve itself before wiping it off.T-9 was developed and licensed by global aerospace leader, The Boeing Company, to fill a need for high-performance, long-term metal protection and lubrication. T-9's unique formulation of solvent carrier and paraffin wax coating was engineered to penetrate crevices deeply, displace moisture, dissolve minor corrosion, and leave a clean, waxy coating with lasting durability-without using Teflon, silicone, fluorocarbons, MEK, or acetone.Boeshield RustFree Rust and Stain Remover, 8 ozUse Boeshield rustfree for the fast and easy removal of rust and stains! For light rust on steel or cast iron, spray rustfree on a rag and wipe surface. Do not spray directly on surface as it may cause spotting. For heavy rust, spray directly on rusted surface and scrub with Scotch-Brite pad. Wipe off and repeat if necessary. Rustfree works best above 70 degrees F. Rustfree is acidic and should be used with care. Use Boeshield T-9 after cleaning with rustfree to protect bare metal surfaces.

• T-9 provides long-term metal protection and lubrication without using Teflon, silicone or fluorocarbons (Boeshield T-9).
• RustFree quickly removes rust, corrosion and stains from steel, cast iron, chrome, tile and porcelain surfaces (Boeshield RustFree).
• T-9 was developed and licensed by Boeing to fill a need for high-performance metal protection and lubrication (Boeshield T-9).
• RustFree works best above 70 degrees F and should be used with care as it has an acidic formula (Boeshield RustFree).