Chimney Fan, Fireplace Exhaust Fan, Exhaust Smoke Machine, for Fireplace Cottage House Stove Fireplace Exhaust Smoke Fan 60W/80W/100W,100W

Product descriptionMotor life is longer, efficient core power, quiet work makes home life more comfortable.Less noise, low friction, high speed, less heat, and greater suction.Durable double bearings, thickened bottom bracket, quality assurance and more durability.Wind Ambassador fuels full burn/Fast temperature rise, energy saving/Good wind effect.Specification:Weight: 3kgVoltage: 110V (USA), 220V (Europe)Power: 60W/80W/100WApplicable caliber: 25.5cmColor: image colorPackage: 1 * induced draw fan1. Domestic fireplaces use induced draft fans, and the air outlet temperature does not exceed 60 degrees. Otherwise it will damage the induced draft fan. Install the power cord with at least 0.5 square copper wire2. Turn off the power switch when installing or removing to avoid electric shock.3. The smoke exhaust port interface must be fixed with waterproof insulating tape.4. The installation at the interface with the chimney must be firm, and the interface must be closely integrated with the chimney to achieve the best effect.5. If the induced draft fan stops working, pay attention to the backflow of the flue gas escape.6. The smoke exhaust port is placed on the chimney. The smoke outlet must be more than 5 meters away from the fire source, otherwise the induced wind will be burned. The temperature of the fireplace cannot burn the insulation layer of the power cord.

• Anti-freeze, anti-frost, anti-high temperature, anti-corrosion, anti-rust, and durable.
• The operating voltage of the product is 220V( 110V-120V voltage, we will be equipped with a voltage converter), and the chimney induced draft fan is used by leaving two ends of the wire for connection to the power source.
• Introduce the wind freely, do not pour smoke, say goodbye to oily smoke.
• The temperature at the chimney outlet cannot exceed 60 degrees, and the distance from the fire source to the chimney outlet is required to be more than 6 meters. Otherwise, the induced draft fan will be burned. Install the power cord with at least 0.5 square copper wire.
• Easy to install, very quiet, suitable for most types of chimneys, and does not require professional technicians to install. During installation or removal, disconnect the power supply to prevent electric shock.