Digital Force Gauge, Analog Force Gauge Dynamometer 200N 44lb for Rubber Plastic Light Industry Textile

Both units are displayed at the same time, without unit conversion.NK series: Newton and kilogram double unit;NLB series: Newton and Pound dual unit;ALB: Two units of pounds and kilograms.Pointer indication, convenient reading, high accuracyPreparation before the test:Choose a suitable connector clamp and install it on the gauge before testing.(1) Tension testSelect the cable clamp and install it on the center rod marked [PULL].(2) Thrust testSelect the push clip and install it on the center rod labeled [PUSH].(3) Use of extension stickWhen the test object cannot be touched, use an extension rod to install the clamp.notes:During the test, the measured object and the gauge must be in the same straight line, otherwise the correct load value cannot be tested.(4) Confirm to change the operation method of the knob(a) [PEAK] change [TRACK]Lightly press the switch knob and turn it to the left at the same time so that the "●" mark is at the [TRACK] position.(b) [TRACK] changes of [PEAK]Turn the knob to the right, the knob pops up, and the mark "●" is at the [TRACK] position.(C) Precautions after the testAfter the test is completed, change the mark "●" and place it in the position of [PEAK]. If the replacement knob is placed in the [TRACK] position for a long time, the life of the inner will be shortened.(5) Adjustment of indicator plate(a) Please confirm whether the pointer is aligned with the [O] of the dial, if not, please turn the adjustable ring of the dial, the dial will rotate with it so that the pointer is aligned with [O].(b) When the machine is placed vertically, especially when the jig is installed, the needle will tilt even if no load is applied. This is the cause of the weight of the machine and the jig. Turn the adjustable ring of the dial to make [O] align with the needle, without affecting the accuracy of the test results.notes:Generally, a load exceeding the Max range is applied to the machine. Test the load, theof the load testing machine will gradually deteriorate, resulting in the correct load test value. When using, do not overload it to maintain the life of the machine.

• The analog dynamometer is small in size, high in accuracy, easy to operate, and easy to carry. It can display both Newton and kilogram units at the same time. The PEAK/TRACK knob can switch between peak load test and continuous load test.
• It is an excellent product to replace the old dynamometer, and is widely used in the testing of electric power, high and low voltage electrical appliances, hardware, auto parts, lighters and ignition systems, light industry, machinery, textiles and other industries. Pull or push load test insertion force or pull force and destructive test. Please read the instructions carefully before using this instrument.
• The NK, NLB, and ALB series are small, high-precision analog dynamometers. They are easy to operate and easy to implement.
• It is widely used in rubber and plastics, light industry, textiles, building doors and windows, composite materials, wires and cables, auto parts, generators, and scientific research units to do push-pull force insertion force and destructive experiments.
• The operation is simple, and various test benches and fixtures can be installed. Peak hold function and continuity.