DRV-08 Digital Multifunction On Delay Time Relay(110VAC 24VAC-DC)

relayGeneralDRV-08 digital timer is designed to be use wherever time dependent control is required.Usage and Working PrincipleDisplay: Displayed here while setting the time and counting down the set time. If the operating time is set in minutes, the rightmost point of the display flashes while the device is counting the time.t Knob:To set the working time value, move the knob to the desired value. When setting the time, the set time is displayed on the screen. (If the time is changed while the device is counting time, the device continues to count the new time set.)x Knob: To set the time range, move the"x" knob to the desired value.The right side is reserved x Knob: To set the time range move the"x" knob to the desired value.9.9 sec., 99 sec., 9.9 min., 99 min., 9.9 hors., 99 hours 6 different time periods can be set. When the time range is set while the device is powered, the device must be de-energized and re-energized in order for the adjusted time range to be valid.MaintenanceSwitch off the device and release from connections. Clean the trunk of device with a swab. Don't use any conductor or chemicalmight damage the device. Make sure device works after cleaningWarningsPlease use the device according to the manual.Don't use the device in wet.Include a switch and circuit breaker in the assembly.Put the switch and circuit breaker nearby the device, operator can reach easily.Mark the switch and circuit breaker as releasing connection for device.SpecificationsOperating Voltage(Un)....: 220V Or 110VAC /24VDC Operating Frequency.......: 50/60 Hz.<;;6VAOperating Temperature..: -20°C.....+55°CTime(t).................................: 0.0sec, - 99hourDisplay:.................: 1x2 LED Display,2x LEDs.Connection Type..............: Terminal connectionWeight................................: Max.22

• relay