E-flite Power 60 Brushless Outrunner Motor 400Kv EFLM4060A Electric Brushless Motors Air

Key FeaturesEquivalent to a 60-size glow engine for 6 to 10 lb (2.7 to 4.5 kg) airplanesIdeal for 46-size 3D airplanes up to 7 lb (3.2 kg)Ideal for models requiring up to 1200 watts of powerHigh-torque, direct-drive alternative to inrunner brushless motorsIncludes mount, prop adapters and mounting hardwareExternal rotor design—6mm shaft can easily be reversed for alternative motor installationsSlotted 14-pole outrunner designHigh-quality construction with ball bearings and hardened steel shaft NOTE: Not recommended to use with E-flite 80-Amp Pro Switch-Mode ESC (EFLA1080B)Quiet, lightweight operationNeeded To Complete60A brushless ESC5S–7S Li-Po or 16- to 24-cell Ni-MH/Ni-Cd14x8 to 16x10 propOverviewThe Power 60 is designed to deliver clean and quiet power for 60-size sport and scale airplanes weighing 6 to 10 pounds (2.7–4.5 kg), 46-size 3D airplanes up to 7 pounds (3.2 kg), or models requiring up to 1200 watts of power. It’s an especially good match for Hangar 9 .60-size warbirds like the Corsair 60 (HAN2575), P-47D Thunderbolt 60 (HAN2975), P-40 Warhawk 60 (HAN2850), P-51 Mustang 60 (HAN2375), P-51 Miss America 60 (HAN2775) and .46-size 3D planes such as the Hangar 9 Funtana 40 (HAN1975) or Seagull Harrier 46 (SEA3025).Detailed InformationHardware is included with the purchase of this motor.Examples of Airplane Setups:NOTE: All data measured at full throttle. Actual performance may vary depending on battery and flight conditions.Hangar 9 P-51 Miss America (HAN2775)Motor: Power 60ESC: Castle Creations Phoenix 80 (Standard settings with 18V Soft Li-Po cutoff and no brake)APC 15x10EBattery: Thunder Power PRO LITE 6000mAh 6S3P (THP60003S3PPL x2 in series)Flying Weight w/Battery: 8

• Equivalent to a 60-size glow engine for 6 to 10 lb (2.7 to 4.5 kg) airplanes
• Ideal for 46-size 3D airplanes up to 7 lb (3.2 kg)
• Ideal for models requiring up to 1200 watts of power
• High-torque, direct-drive alternative to inrunner brushless motors
• Includes mount, prop adapters and mounting hardware