EM-72-XXD Digital Multimeter, Contains 3 C.T, Three Phase Volt(L-L),(L-N), Ampere,Frequency, Phase Sequence Display(100D(10-100A))

Multimeters & AnalyzersGeneralEM-72-60D/100D/250D Multimeter are designed to display 3 phase current, voltage and frequency.Usage and Working PrincipleMake the connections according to the diagram. Connect the current before electric charges to be connected to the system. EM-72-60DUse the 3 pcs CT-60(1-63 A) current provided with the device. Connect the current lead wires to k-1terminals of the device. The device automatically displays the current value without any setting. So, don't use current of different brands and models. Wher the device is energized, it shows the phase-neutral, phase-phase voltages, frequency, phase sequence and current values on the displays EM-72-100DUse the 3 pcs CT-120(10-100 A) current provided with the device. Connect the current lead wires to k-1terminals of the device. The device automatically displays the current value without any setting. So, don't use current of different brands and models. Wher the device is energized, it shows the phase-neutral, phase-phase voltages, frequency, phase sequence and current values on the displays.EM-72-250DUse the 3 pcs CT-300(10-250 A) current provided with the device. Connect the current lead wires to k-1terminals of the device. The device automatically displays the current value without any setting. So, don't use current of different brands and models. Wher the device is energized, it shows the phase-neutral, phase-phase voltages, frequency, phase sequence and current values on the displaysYou can see the frequency between phase and phase, phase and neutral at the first display group. When the voltage values is shown (V) led gets on. While pressing the up button ,phase-phase range can be seen.When the phase-phase values is shown you can see the leds on phase phase. While pressing theup buttons you can see the frequency value and Hz led gets on.Phase Sequence: If the phase sequence is reverse you can see the (X) led gets on which take place in the 1st display group.MaintenanceSwitch off the device and release from connections. Clean the trunk of device with a swab. Don't use any conductor or chemical might damage the device. Make sure device works after cleaning.WarningsPlease use the device according to the manual.Don't use the device in wet.Include a switch and circuit breaker in the assembly.Put the switch and circuit breaker nearby the device, operator can easily.Mark the switch and circuit breaker as releasing connection for device.SpecificationsOperating Voltage(Un).......: 85V - 240V ACOperating Frequency..........: 50/60 Hz.<;6VAOperating Temperature.....: -20°C.....+55°CVoltage Measuring Range.....: 1V - 500V ACMeasurement Range..........: 60D(1-63A), 100D(10-100A), 250D(10-250A)Measurement Precision.....: ±%1Display......................: (3 digit) 6x Displays + 9 LedsConnection Type.................: Plug-in terminalCable Diameter....................: 1,5mm²Weight...................................: Max. 325gr.Panel Hole Sizes...................: 68x68mm Mounting..............................: Panel front mounted<;2000meterDimensionsConstructionConnection DiagramConnection Diagram==========Battery Included : NoHigh-concerned chemical : NoneIs Smart Device : NoOperating Mode : Auto RangeOperating Temperature : -20~+55DIY Supplies : ElectricalCertification : NoneOrigin : Mainland Dimensions : 72*72AC Current : 63A,100A,250ADC Voltage : NONEDisplay Type : Digital DisplayAC Voltage : 220VACInput(V) : 1-300VAC(L-N),1-500VAC(L-L) 50/60Hz60D Input(A) : 1-63A AC 50/60Hz100D Input(A) : 10-100A AC 50/60Hz250D Input(A) : 10-250A AC 50/60HzFunction 1 : MultimeterFunction 2 : Contains 3 C.TFunction 3 : Disiplay Three Phase Volt(L-N)Function 4 : Disiplay Three Phase Volt(L-L)Function 5 : Disiplay Three Phase AmpereFunction 6 : Disiplay Three Phase FrequencyFunction 7 : Disiplay Phase SequenceFunction 8 : DigitalFunction 9 : Slim Compact,Function 10 : TURE RMSFunction 11 : High precision

• Multimeters & Analyzers