EVURU FT231X USB to RS232 Serial Adapter PCB Converter Module Support Win10

Welcome to my small store, where you can find unique products and high-quality services, providing you with a better service experienceFtdi ft231x usb rs232 adapterft231x + zt213 chip, Geniune FTDI chip import from UK System Support: Win10/8/7/XP/Android/M/Linux/Wince/Vistausb2.0 standard, full speed 12M supportOn-board full COM port signals output: TXD, RXD, CTS, RTS, DSR, DTR, DCD, RI, GNDPlus VCC 5V from USB VDD directly, support 100mA or lesswith full COM port standard signals, support full DB9 pinoutboard size: About FT231XSingle chip USB to asynchronous serial data transfer interface.Entire USB protocol handled on the chip. No USB specific firmware programming required.Fully integrated 2048 byte EEPROM Compatible With storing device descriptors and CBUS I/O configuration.Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.Data transfer rates from 300 baud to 3 Mbaud.512 byte receive buffer and 512 byte transmit buffer utilising buffer smoothing technology to allow Compatible With high data throughput.FTDI royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement Compatible With USB driver development in most cases.Configurable CBUS I/O pins.Transmit and receive L drive signals.UART interface support Compatible With 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no paritySynchronous and asynchronous bit bang interface options with RD# and WR# strobes.Battery Charger Detection. May be used by mobile devices to detect the presence of a charger on the USB port to enable higher current / faster charging of batteries.Device supplied pre-programmed with unique USB serial number.Supports bus powered, self powered and high-power bus powered USB configurations.Integrated +3.3V level converter

• Single chip USB to asynchronous serial data transfer interface.
• Entire USB protocol handled on the chip. No USB specific firmware programming required.
• Fully integrated 2048 byte EEPROM Compatible With storing device descriptors and CBUS I/O configuration.
• Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
• Data transfer rates from 300 baud to 3 Mbaud.