New Arrivals/Restock

FNIRSI 2C53T Upgraded Handheld Oscilloscope, 50MHz Bandwidth, 3IN1 Digital Oscilloscope Multimeter DDS Generator, 250MS/s Sampling Rate, 19999 Counts, Voltage, Current, Capacitor, Resistor, Diode Test

flash sale iconLimited Time Sale
Until the end
04
48
51

$49.79 cheaper than the new price!!

Free shipping for purchases over $99 ( Details )
Free cash-on-delivery fees for purchases over $99
Please note that the sales price and tax displayed may differ between online and in-store. Also, the product may be out of stock in-store.
New  $82.99
quantity

Product details

Management number 209010117 Release Date 2026/03/29 List Price $33.20 Model Number 209010117
Category
  • 【Newly Version】The 2C53T is an upgraded version of the 2C23T, which improves the measuring range and adds math operation,cursor measurement,persistence mode,XY mode features
  • 【2 Channel Oscilloscope】50 MHz bandwidth, 250 MSa/s sampling rate, 1 Kpts record depth, automatic measurement function, max voltage 400 V, vertical sensitivity 10mV/div-10V/div , support waveform image storage and export
  • 【4.5-Digit 19999 Counts Multimeter】AC Voltage: 0-750 V, DC Voltage: 0-999.9 V, DC/AC Current: 0-9.999 A, Resistance: 0-19.99 MΩ, Capacitance: 0-99.99 mF, Continuity Measurement. Multi-function meter for professionals, schools and hobbyists
  • 【Signal Generator】The maximum waveform output frequency can reach 50 kHz and a step of 1 Hz, and can output 13 waveforms
  • 【Save function】one-click save, screening function. You can upload the saved image by connecting to PC via Type-C. You can easily compare the waveforms by displaying the reference waveform and the measured waveform on the same screen
  • 【Excellent Design】The Oscilloscope adopts FPGA+MCU+ADC hardware architecture, built-in high-voltage protection module, adopts 2.8 inch LCD display, built-in 3000 mAh battery, standby time up to 6 H, Type-C interface supports 5 V/1 A charging
  • 【Language Switch】After powering on the device, press the left or right directional buttons to enter System Settings, then select the Language option to switch languages.
  • 【Firmware Installation】 Connect the device to the computer via a data cable. Press and hold the MENU button, then press the Power button to enter firmware installation mode. Copy the firmware to the popped-up USB drive on the computer.
Batteries 1 Nonstandard Battery batteries required. (included)
Department All Ages, Unisex, Professional
Item Weight 10.6 ounces
Manufacturer FNIRSI
Item model number FNIRSI-2C53T
Product Dimensions 6.57 x 3.5 x 1.38 inches

Correction of product information

If you notice any omissions or errors in the product information on this page, please use the correction request form below.

Correction Request Form

Product Review

You must be logged in to post a review