HEEPDD High Accuracy Ultrasonic Anemometer, Material, Wind Speed Sensor 0-45 Ms for Greenhouses and Ships High Accuracy Ultrasonic Anemometer, ABS Nan Gardening

1. STRONG MATERIAL: The wind cup is made of excellent ABS material, with high strength, small starting wind speed, and good erosion resistance 2. INTERFERENCE : The wind speed sensor has strong prevent interference ability, small and lightweight, easy to carry and assemble 3. WIRING MODE: The wind speed monitoring sensor is compatible with two cable outlet modes, including bottom cable outlet and side cable outlet 4. WEATHER : Wind speed sensor anemometer possess strong pressure resistance, suitable for all kinds of harsh environment, with strong wind resistance 5. EQUIPPED WITH EXTENSION CABLE: The wind speed sensor connection extension line is 0.8m long, the interface has a sealing washer design, Specification: Item Type: Wind Speed Monitoring Sensor Material: ABS Size: Approx. 158 x 180 x 70mm / 6.22 x 7.09 x 2.76in Power Supply Voltage: DC9-30V Signal Output: 4-20mA Measurement Range: Wind speed 0~45m/s Extension Line Length: Approx. 0.8m / 2.6ft Accuracy: ±(0.5+0.02V)m/s(V represent real time wind speed value) Resolution: 0.1m/s Startup Wind Speed: ≤0.8m/s Maximum Power Consumption: 0.48W Load Capacity: DC12V power supply, current output impedance ≤350Ω DC24V power supply, current output impedance ≤900Ω, voltage output impedance ≥1KΩ Working Environment: Temperature: -35℃~60℃, Humidity: ≤100%RH non condensing Protection Level: IP64 Widely Used In: Greenhouses, , ships, docks, aquaculture, advertising gate barriers, weather, marine, environmental, airports, ports, laboratories, industrial, agricultural and traffic environments for wind speed measurement Formula: 4-20mA: F=(I-4)/16xA+B F: Wind speed, m/s; I: Sensor output current value, mA; A: Sensor range width(range upper limit minus lower limit); B: Minimum value of sensor range(lower limit of range); Wire Connection Method: Red Output Signal(voltage): Power supply positive Black Output Signal(voltage): Power supply negative Yellow Output signal(voltage): Signal Distribution Diameter: Approx. 63mm / 2.48in Mounting Hole Diameter: Approx. 3.2mm / 0.13in Aerial Plug Diameter: Approx. 15mm / 0.59in(recommended to reserve 25mm for wiring, wire connection first, then install and fix the sensor) Troubleshooting: 1. The wind Vane/Wing does not rotate smoothly and has a large delay. There may be foreign objects or jamming in the bearings due to long term use. Please return the sensor to the company for processing; 2. The instrument display value is incorrect. May be due to wiring problems or communication port failures that prevent obtaining correct data. Please check whether the wiring is correct and secure, whether the port is occupied, and whether the port settings are correct; Weight: Approx. 272.00g / 9.59oz How to Use: 1. Ensure the mounting bracket is parallel to the ground. 2. Secure the sensor to the mounting bracket using M3 screws and nuts through the 4 mounting holes on the sensor. 3. Connect the aviation plug to the sensor aviation socket through the reserved M23 aviation cable hole. 4. Avoid disassembling the sensor during installation. PackageList: 1 x Wind Speed Monitoring Sensor Notice: 1. Please check the packaging for integrity and verify that the product model matches the selection; 2. Do not connect the wires while they are powered. Only power on after confirming the connections are correct; 3. The length of the sensor wire may affect the product output signal. Do not alter the product randomly while using it. If there are changes needed, please contact the manufacturer; 4. Sensors are accurate instruments. Users should not disassemble them, allow incisive objects or erosive liquids to come into contact with the sensor surface to avoid damage to the product; 5. Please keep the calibration certificate and the certificate of conformity. Return them together with the product for repairs; 6. Do not plug or unplug while the power is on.7. Customers need to provide their own screws and nuts.

• [Durable ABS Construction]Built with ABS material for optimal performance in outdoor settings, suitable for use in greenhouses, ships, or docks.
• [Easy Installation]Features a user-friendly setup process with clear wiring instructions, making it ideal for both professional and personal use.
• [High Accuracy Monitoring]Delivers precise wind speed readings up to 45 m/s with an accuracy of ±0.5 m/s to ensure reliable data in various environments.
• [Versatile Applications]Perfect for environmental monitoring in aquaculture, weather stations, and industrial settings to measure wind speed accurately.
• [Wide Operating Range]Works effectively in temperatures from -31°F to 140°F and humidity levels up to 100% for dependable monitoring in diverse weather conditions.