Index TRCA0411 – Rivet Nuts Wide Head M-04 x 11.0

"Wide head rivet nuts suitable for applications in aluminum carpentry, sheet metal assembly, work with sheet metal profiles and other high-strength applications where high tensile strength is required. Perfect as an alternative to traditional mounting methods such as screws, bolts and washers when a thread point is needed in soft or small thickness materials. This anchor reinforces the drill and prevents push failure. It can also be used as a spacer. Its mechanical characteristics and quick installation (2-4 seconds) offer great advantages in terms of economic and reduced assembly time. These nuts are made of zinc plated steel, a high performance material with great tensile strength and that protects the part from corrosion and rust. Its design features a ribbed body that improves the resistance to spin in soft materials such as aluminum and improves galvanic continuity in sheet metal. They can be installed on threaded materials, plastics and metal materials. Its wide head provides a large contact surface for distributing efforts. Available in a wide range of shapes and sizes, from M3 x 10mm to M12 x 23mm. The installation of these blind rivet nuts is done on one side of the assembly: ideal for pipes and sets of zones without internal access. Installation process: 1. Select the appropriate rivet nut based on the load to be applied, the metric of the screw to be installed, the thickness of the base material and the type of application. 2. Drill to the diameter corresponding to each nut. 3. Install the rivet nut. 4. Place the material to be fixed. 5. Insert the riveter shank into the nut. 6. Screw gently until riveter stops. 7. Screw firmly without exceeding the tightening torque. 8. Unscrew the chuck and the nut will be installed."

• [WIDE HEAD] Wide head rivet nuts for applications in aluminum woodworking, sheet metal assembly and sheet metal profile work.
• [ALTERNATIVE TO TRADITIONAL ASSEMBLY] Perfect as an alternative to traditional mounting methods such as screws, bolts and washers when a thread point is needed in soft or small thickness materials.
• [STRETCHED BODY] Its design features a fluted body that improves spin resistance in soft materials such as aluminum and improves galvanic continuity in sheet metal.
• [ZINCHED STEEL] Made of zinc plated steel, a high performance material with great tensile strength and that protects the part from corrosion and rust.
• [DIFFERENT MEASUREMENTS] Available in a wide range of shapes and sizes, from M3 x 10mm to M12 x 23mm.