INTBUYING 110V 450W Melt Flow Rate MFR Index Tester Digital 400A Lab Supply

This Melt Flow Index Tester is complied with GB/T3682-2000, ASTM D1238-98 standards, and refer to JB/T5456, ISO1133 ect. similar standards. It is widely used in plastics raw materials products, the petrochemical industry and related universities, scientific research institutes, and commodity inspection departments. It is used to determine melt-mass flow rate (MFR). It is applicable not only to the higher melting temperature, such as polycarbonate, nylon, Fluor plastics, poly oxide and other engineering plastics It also applies to plastic measurement of melt lower temperature, such as polyethylene, polystyrene, polypropylene, ABS resin, polyformaldehyde resin Parameters: Temperature Range: Room Temperature - 450℃ Temperature display error: ± 0.1 ℃Temperature fluctuation: ± 0.1 ℃Recovery time: ≤ 1min, quickly restore the constant temperature state after fillingTemperature Control Resolution :0.1℃ Timing Resolution:0.01S Loading: 10KG (0.325kg;0.875kg;0.96kg;1.2kg;1.64kg;5kg) Testing methods: quality law Scraping way: Manual and Automatic Power:500W Testing range: 0.1-200g/10min Temperature Recovery: Less than 3 min Working conditions: Ambient temperature: 10 ℃ - 40 ℃ Ambient relative humidity: 30% - 80% In an environment free of vibration and corrosive media. Correctly installed on a solid foundation There is no strong magnetic field in the operating environment, and there is no strong convection in the air Item Included(025030): 1*110V Melt Flow Index Rate Tester

• It adopts liquid crystal display and SMD keyboard input, which can set time, temperature and sampling times intuitively and conveniently.
• With embedded operating system, internal task scheduling is reasonable, timing, delay and other control are accurate, ensuring the accuracy of temperature control, voice prompts, etc.
• Beautiful appearance, reasonable design, stable performance and convenient operation.
• The material is automatically cut during the test, and the material is manually cut when the instrument is adjusted.
• Can calculate and save test results