Laboratory Water Baths, Thermostatic 5 L Digital Lifting Heater, Electrical Heating Devices with Stainless Steel Coating, for Chemistry, Inge

Product descriptionHow to use1. The water bath and electronic oil at constant temperature must be placed on a fixed platform.First, hold the hose at the drainage outlet and then pour clean water in the water bath box (to shorten the heating time, hot water can also be injected).2. Turn on the food, the red indicator light shown by off, turn the temperature adjustment knob at the established temperature, the water begins to heat up and the indicator light on turns on;When the temperature increases to the established temperature, the indicator light goes out and the water begins to maintain a constant temperature.3. After the water bath is at a constant temperature, place the container containing the material in the water bath to start heating and at constant temperature.4. To guarantee the constant temperature effect during the constant temperature, the part where the constant temperature container comes into contact with the box can be sealed with cardboard.The material in the container must be lower than the surface of the water bath at constant temperature of the water bath.5. After use, take out the container, turn off the device and remove the water from the box.In addition, keep a record of the use of the instrument.SpecificationCapacity: 5LPower: 2000WInterior tank diameter: 280*170mmTemperature control range: 0-25 ° CTemperature control precision: ± 1 ° CTemperature control method: Smart temperature control requestProduct size: 400*370*270mmWeight: 8kg

• (Product details) Product size: 400*370*270 mm, inner tank diameter: 280*170 mm.Weight 8 kg, capacity 5 L, power 2000 W. The inner tank of the water bath can be raised and down.
• (High quality) The interior cavity of the water bath adopts single -steel molding technology, which is oxide resistant and corrosion, easy to clean and has a built -in round -thicming load frame, which has a stronger load capacity.
• (Precise temperature control) Water bath at constant laboratory temperature has a wide temperature range, integrated temperature and timer controller, and uses an PID intelligent temperature control to effectively control the temperature and heating time, and can raise the temperature from the inside to 250 ° C.The precision is only ± 0.5 ℃.
• (Quick heating) The digital water bath uses stainless steel heating tubes and sensors that heat up evenly, they heat up quickly and are resistant to high temperatures.It can be used with rotating evaporators and glass reactors.