MGC100 Genset Controller Auto Start Small Power Protection Module LED Display Controller Board Gasoline Generator Part

Electronic Engine ControlMGC100 auto start small gasoline generator set controller petrol genset universal LED display remote board controller MGC100 Petrol Genset Controller is designed for start and protection of single genset. It allows manual and remote start/stop, data measurement, alarm indicate, shutdown protection functions. The controller fit with LED display, button-press operation, and it achieves precise measurement of various parameters, protection and control of genset. All of parameters can be configured from front panel. The controller which can be widely used in data display and fault protection of a number of small diesel and petrol genset with easy operation, reliable work, compact structure and simple connections.Performance and characteristics1. Multi-function digital tube display, touch the button to operate. Switchable displayed power:Generation voltage VGeneration frequency HzCumulative running time (maximum 9999 hours) HBattery voltage V2. The panel has a red light-emitting diode (LED) to display the working and alarm status;3. Control the gasoline generator set or diesel generator set by wiring;4. Suitable for three-phase four-wire, three-phase three-wire, two-phase three-wire, single-phase two-wire (120V / 240V) power 50Hz / 60Hz system;5. With the protection of power generation under / over voltage, over speed, start failure, emergency stop, high water temperature, low oil pressure protection function, the LED indicates the alarm amount during protection, and also performs shutdown protection;6. The generator speed can be taken from the power generation frequency or speed sensor;7. 4 digital inputs (high water temperature input, low oil pressure input, remote input, emergency stop input);8. 2 relay output ports (starting output, fuel output), of which fuel output port is programmable output port;9.1 programmable transistor output ports, which can be set as preheat output, alarm output, power-off stop 10. output and idle speed output, etc .; two start success conditions (speed sensor, power generation) can be selected; parameter setting function: allows users Its parameters are changed and stored in the internal .EEPROM memory, which will not be lost when the system is powered off. All controller parameters can be adjusted from the front panel of the controller;12. Modular structure design, flame-retardant ABS plastic shell, embedded installation, compact structure, small size, easy installation;==========Model Number : MGC100

• Electronic Engine Control
• MGC100 Genset Controller Auto Start Small Power Protection Module LED Display Controller Board Gasoline Generator Part