Paint Scraper Artifact, KTQ-II-Adjustable Wet Film Applicator, Precision Coating Machine, 0-3500micm,Stable Operation(200mm)

Paint Scraper Artifact, KTQ-II-Adjustable Wet Film Applicator, Precision Coating Machine, 0-3500micmAdjustable preparerThe adjustable applicator can control the gap by adjusting the two differentials above the film applicator / the lower blade can be adjusted up and down.That is the final coating thickness of the coating.Steps01/Place the film applicator on a completely flat test surface, and adjust the gap required by the scraper, which should be twice the required wet film thickness.02/In the front section of the coating knife, pour a small amount of test sample between the end plates, and move the instrument on the surface at a slow and uniform speed of about 1-2 cm per second until the liquid has been completely coated and/or any remaining The liquid has been removed from the end of the coating path.03/The exact ratio of the wet film thickness to the gap of any coating knife depends on the material used, the viscosity and texture of the liquid, the pressure applied on the coating knife, the coating speed and the geometry of the coating edge.04/The actual coated wet film should be measured with a wet film thickness gauge, and the gap should be adjusted until the required wet film thickness is reached.

• 01/Used to achieve uniform film thickness on a flat substrate.
• 02/Because the gap is adjustable, it can reduce the need for various fixed gap applicators.
• 03/The gap can be set between 0 and 3500 microns, and the gap of the squeegee can be adjusted in units of 10 microns.
• 04/The adjustable film applicator has a variety of film widths to choose from, and the width can be selected from 55 to 300mm.
• 05/The film applicator has an extended edge to gather the paint during the film coating process, and can manually apply high-concentration and viscous liquids on a solid and flat substrate.