Seco-Larm Enforcer Access Control Keypad with Proximity Reader, Backlit (SK-1131-SPQ)

With beauty and brains, the Seco-Larm Enforcer Access Control Keypad (Indoor with Proximity Reader) is a versatile keypad and card reader that looks good and works well anywhere indoors, whether you need it for the office, the house, or the warehouse. The backlit keypad glows soft blue and its stainless steel faceplate makes for a sleek, classy trim around the edges. Additionally, the built-in proximity card reader works with any Seco-Larm 125kHz proximity cards or tags (sold separately). Offering advanced programming options and multiple outputs, this self-contained keypad can become your go-to solution for nearly any standard access control installation.12-button illuminated keypad with stainless-steel faceBuilt-in card reader works with any 125kHz proximity cards/tagsThree outputs: two relay, one transistor groundSupports 1,000 users (4-8 digit codes) for primary outputAuto-disable access at specific times with built-in clockEgress input allows exit without code/card entryTriggers warning if door is propped openThe keypad features two 1-Amp relay outputs, plus a transistor ground output, giving you the flexibility to wire into any nearly access control device, such as alarm control panels, electronic door strikes, door alarms, and door chimes.Advanced Programming Options for Reliable SecurityWith three outputs, the keypad can be programmed for up to 1,200 users total — 1,000 for the primary output, and 100 for each of the other two outputs. Authorized users can be easily added and deleted, allowing you to provide temporary access to guests.Included in the long list of programmable options below, the keypad stands out for its four programmable access modes, a "mantrap" function for areas with two doors, a "super user code" that provides admin access to the keypad, and three independently wired LEDs for use as custom status indicators.Keypad Features:4 programmable access modes for all 3 outputs:Card onlyCode onlyCard and common user codeCard and unique user codeOptional door open alarm.Trigger auto-lockout or duress output after 5-10 unsuccessful attempts.Duress Output: Signals a silent alarm if an authorized user is forced to open the door under duress.Alarm Output: Triggers an optional alarm control panel if a protected door is forced open.Keypad Active Output: Activates for 10 seconds when any key on the keypad is pressed to trigger a video recorder, turn on a light, or signal a guard.Egress Input: Lets users exit the protected premises without using a code/card.Mantrap: For a protected area with two doors, this feature allows only one door to be open at a time.Installation & Power DetailsThe keypad supports 12-24V AC/DC universal power, eliminating the need for special programming or jumpers. It wires into a power supply (sold separately) and mounts to the wall with the included screws and back box. In case of a power outage, all your data is stored and reliably retained in the keypad's non-volatile EEPROM memory.ContentsKeypadBack Box(2) Installation Screws(2) Mounting ScrewsDiodeManualNOTE: Install indoors only; not rated for outdoor use. Proximity cards/tags are sold separately.Key Product FeaturesBuilt-in proximity reader: 125kHz (EM125)3 Outputs:Main relay (Form C 1A at 30VDC).Aux. relay (Form C 1A at 30VDC).Transistor ground output (100mA at 24VDC).Relay output inhibit control.Built-in tamper (N.C.) circuit.Technical DetailsMPN: SK-1131-SPQUPC: 676544015727Operating Voltage: 12~24 VDC/VACCurrent Draw (at 12VDC):Standby: 66mATotal Max. Current Draw: 160mAOutputs:#1 – Form C: 1A at 30VDC#2 – Form C: 1A at 30VDC#3 – Transistor Ground: 100mA at 24VDCK or A: 100mA at 24VDCDuress: 100mA at 24VDCInterlock: 100mA at 24VDCTamper: 50mA at 24VDCInputs:Egress: N.O. GroundDoor Sense: N.C. GroundDoor Inhibit: N.O. GroundProximity Reader Frequency: 125kHz (EM125)Proximity Reader Sensing Distance: 1-1/2 inches (38mm)Operating Temperature: -4° to 158°F (-20° to 70°C)Operating Humidity: 5 to 95 percent non-condensingDimensions (including back box): 4-5/8 x 2-7/8 x 1-1/2 inches (117 x 73 x 38 mm)Weight: 6 ounces (170g)Approvals: RoHS, FCC, CEWarranty: Limited Lifetime Warranty

• 12-button illuminated keypad with stainless-steel face
• Built-in card reader works with any 125kHz proximity cards/tags
• Three outputs: two relay, one transistor ground
• Supports 1,000 users (4-8 digit codes) for primary output
• Egress input allows exit without code/card entry