SPAX 257000601205 for Wood Construction, Flat Head, T-Star Plus, 4Cut, Partial Thread, Stainless Steel A2, 1.4567, (6.0 x 120 mm, Pack of 100)

T-Star plus with tenon guide, 4CUT tip, serrated edge, from screw length 160 mm, 4-cut cutter, sliding coating. European technical evaluation ETA 12/0114. Areas of application: outdoor areas e.g. carports, playground equipment, canopies, bridge coverings made of planks, balconies, etc.; screw connection of sheets: e.g. solar roof hooks; securing carpenter's wood connections: e.g. offsets. Use: outdoor applications - directly weathered

• Use: For easy screwing of steel parts and sheets to wood. Better sealing of joints even with deformed woods. High corrosion resistance thanks to stainless steel A2
• Higher head pulling forces thanks to plate head. Optimum power transmission and clean fit even when processing overhead with SPAX bit T-Star plus T30 bit with guide pins
• Effortless work and longer battery life: no pre-drilling (depending on the wood). Easy penetration, reduction of the splitting effect thanks to 4CUT: Four edges in the screw tip. Easier cutting of the wood fibre thanks to Spax wave profile
• Made in Germany: TÜV certified. Approved by building authorities: European technical approval for screws as wood fasteners in load-bearing wooden constructions (ETA-12/0114)
• Box contents: 1 SPAX box, pack of 100 wood screws, T-Star plus, flat head, partial thread, 4Cut, stainless steel A2, material quality: 1.4567, thread diameter (Ød1) = 6 mm x total length (Ls) = 120 mm, partial thread length (LgT) = 68 mm, head diameter (Ødk): 13.6 mm, bit not included included