SW-Stahl 10970L Universal Puller 20-150 mm I Puller Tool 3-Arm I Internal and External Puller

The construction of the tab puller causes automatic pressing of the trigger hooks to the component. Extractor hook with double-sided hook base. With narrow and wide hook base. Very robust drop forged design. Spindle with fine thread. Interchangeable centring ball

• This bearing puller tool is used to loosen tensioned connections of components. Pressed, shrunk or retracted components that are held in their position by their own frictional force can be loosened with the puller.
• The trigger hooks from the puller car tool can be adjusted to achieve different clamping depths.
• Two or three-leg internal pullers are ideal for loosening pressed parts of axles or from holes such as bushings or ball bearings. Among other things, the ball joint puller is used to pull on and off gears, bearing outer rings, pulleys, pole wheels, windscreen wipers and similar parts.
• Before using the three-arm puller, remove all parts that could hinder the unhindered exit of the part to be removed, such as screws, nuts, wedges etc. The puller arms should be placed so that the bearing puller sits exactly in the pull axis. The three-arm puller has a span of 20 - 150 mm.
• Before using the puller car tool, remove all parts that could hinder the unhindered exit of the part to be removed, such as screws, nuts, wedges etc. The puller arms should be placed so that the bearing puller sits exactly in the pull axis. Puller has a span of 20 - 150 mm. The trigger hook can be adjusted several times to achieve different clamping depths.