TCP-204S Handheld Temperature Inspector Temperature Recorder Portable Multi 4-Channel Temperature Tester

Model TCP-200S Multiway Temperature RecorderDisplay mode TFT high-definition touch LCDOptional test path 4-8 waysAccuracy Measurement and display accuracy 0.2%+0.5℃±2 words (excluding thermocouple accuracy)Sampling speed Fast 1 secondAlarm functionTemperature unit Support K, ℉, ℃Interface language Support Chinese and English switchingRecording time 1-9999 secondsThermocouple type K, N, E, J, T, R, B, STemperature Compensation Support all channels and provide various compensation modes.Data protection No loss of data after power down, can store data from 72 hours to 180 days.Labelling Comments Each temperature value can be named arbitrarily.Environment Temperature: 0℃～40℃; Humidity: 40%～80%; Altitude: 2000m.Dimension 80mm×30mm×166mmPower supply configuration AC85V-265V wide voltage range of normal operationWeight 1kg

• adopts high-speed, high-performance 32-bit ARM microprocessor, the screen response time is less than one-twentieth of a second, and the display is smooth and lag-free; data can be viewed through the data interface not only real-time temperature data, temperature curves, and bar graphs, each channel of the curve and bar a variety of colours can be freely set, while the numerical value interface can also display the maximum value, minimum value and the average value of the time, the temperature unit has the option to display ℃ and F and K
• supports compensation signal input for each way of data, easy to set up compensation signal input, wide range of compensation options, up to -200~1370, and a variety of compensation options, respectively, direct compensation and linear compensation. Sampling rate (full-channel acquisition and saving): fast (1S) acquisition,..;
• In the main data interface, each channel has an alarm display, and at the same time, it indicates the lower limit, lower limit, upper limit, upper limit alarm of each channel, and the alarm limit of each channel can be adjusted in the setting to adapt to the application of various occasions; after the alarm, the instrument will automatically record the alarm information, which can be also automatically saved on the external USB memory stick, and will not be lost in case of power failure; The number of alarm information display can be up to 100, including alarm time, alarm channel, exceeding limit and actual measured value at the time of alarm.
• Simultaneous temperature data acquisition, recording, display and alarm for up to 8 channels; Acquisition records can be exported, no need for pen and paper records, very small daily maintenance workload, low operating costs; Each way temperature value can be named arbitrarily, convenient sampling of engineering bit number, engineering unit of record distinction;
• Real-time clock, the use of hardware real-time clock, power-down lithium battery power supply, the maximum clock error ± 1 points / year;