Watercool WCP D5 Pump - PWM

The WCP D5-PWM is a DC pump using the spherical motor design as developed by Laing. The only moving part in a spherical motor pump is a spherically shaped rotor/impeller unit, which is seated on an ultra-hard, wear-resistant ceramic ball.The conventional shaft, shaft bearings, and shaft seals have been eliminated. The occurrence of bearing clearance – and the associated increase of noise – is not possible due to the principle involved.The bearing is self-adjusting. It is lubricated directly by the medium being pumped (wet rotor design). Separate maintenance is not required. All parts in contact with the medium are corrosion resistant.Under normal conditions, it is impossible for the rotor to become locked due to the spherical motor design. Reliable starting is also ensured even after long periods of shutdown.The pump's rotation speed can be finely adjusted throughout a wide output range via a speed governor, which is integrated into the stator. Thus, you may easily regulate hydraulic performance or limit power consumption. The pump always uses the same torque, independent from rotational speed, ensuring reliable starting also on the lowest power level.Power supply is provided by a 4 pin Molex connector. The pump also offers a 3 pin Molex plug for rotational speed monitoring.Rotational speed regulation via PWM. This version comes with a shiny palte made from stainless steel on its back.SpecificationsDimensions (L x W x H): 65 x 65 x 57 mmMotor design: Electronically commutated spherical motorRated voltage: 12V DCPower consumption: 23 WVoltage range: 8-24V DCPressure head at 12 V: 3,7 mMax. flow rate: 1500 l/hAcceptable media: Water, water-glycol mixturesMax. system temperature: 60°CMax. system pressure: 1,5 barPower supply: 4Pin MolexPWM: yes Model: 30048

• The WCP D5-VARIO is a DC pump using the spherical motor design
• Self-adjusting bearing design
• All parts in contact with the medium are corrosion resistant
• Max. flow rate: 1500 l/h
• Dimensions (L x W x H): 65 x 65 x 57 mm