WeldingCity TIG Welding Torch Air-cooled WP-9 (125-amp)/WP-17 (150-amp) Power Cable Hose 57Y01R (12.5-ft) and Dinse-type 25mm (Small) .355"-pin Gas-thru Adapter

TIG Torch Model: one-piece cable WP-9 and WP-17 | Current Rating: 125/150-amp air-cooled| Cable Length: 12.5-ft/25-ft | Cable Adapter: 105Z57/Dinse-type 25mm gas-thru/Dinse-type 35-50mm gas thru/Dinse-type 35-50mm solid pin with separate gas hose

• Premium quality air-cooled WP-9 (125-amp)/WP-17 (150-amp) TIG welding torch power cable (1-piece style) with various cable lengths and adapters for use with most of mainstream TIG welders. Shipped as un-assembled.
• One-piece type EPDM rubber-jacketed power cable hose for air-cooled WP-9 series and WP-17 series TIG torch. Cable fittings: 3/8"-24 RH male. Available cable length: 12.5-ft (57Y01R) and 25-ft (57Y03R).
• Cable adapter 105Z57 (brass) with 3/8-24 RH (female) to accept 57Y01R/57Y03R power cable and 1/2" electrical stud hole. With female fitting 5/8-18 RH for shielding gas hose connection.
• Dinse-type cable adapters: 35-50mm solid 1/2"-pin adapter with separate gas hose compatible with Miller 195378/Lincoln K960-1 adapter adapter; 35-50mm 1/2"-pin in-line gas-thru adapter compatible with Miller 194722/Lincoln K1622-1 adapter; 25mm (small) .355"-pin in-line gas-thru adapter compatible with Miller 273483 (195234) adapter. All Dinse adapters accept 57Y01R/57Y03R power cable. CHECK ALL PICTURES AND YOUR TIG WELDER FOR MATCHING.
• U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.