XENITE Chimney Fan, Fan, Chimney Extraction, Smoke Evacuator, Fan, Fireplace Drawing, Barbecue Air, 80W 7 Leaves

The smoke evacuator most widely used and recognized in smoke extraction systems.Thanks to the classic system, an ideal balance is reached between ease of installation and safety of use, thanks to high quality while following the strictest parameters of European certification.Product weight: 2.4kgTension: 190-240Vnote1. The domestic fireplace adopts an induced draw fan and the output temperature should not exceed 60 degrees.Otherwise, the induced draw fan will be damaged.Install the power cord at least 0.5 square copper wire2. When installing or withdrawing, please turn off the power switch to avoid electric shocks.3. The interface with the smoke evacuator must be fixed with waterproof insulating tape.4. The installation at the interface with the fireplace must be firm and the interface must be closely integrated into the fireplace to obtain the best effect.5. When the induced draw fan stops working, you have to pay attention to the smoke return causing the emergence of smoke.6. The smoke evacuator is placed on the fireplace.The smoke extractor must be more than 6 meters from the fire source, otherwise the induced draw fan will be burned.The fireplace temperature cannot burn the insulating layer of the power cord.Package Included1 * induced draw fan

• * Chimney fan 50 W, 60 W, 80 W, 100 W for duct diameter 13-22 cm, 100 W 12 sheets, 50 W 3 sheets, 60 W 4 sheets, 60 W 6 sheets, 60 W 7 sheets, 80W 7 sheets
• * Note!!!The product operating voltage is 190-230 V (voltage 110 V-120 V, we will be equipped with a voltage converter) and the draw fan induced by the chimney is used by leaving two ends of wire to connectat the power source.
• * It is very suitable for chimney accessories.The draw fan induced by the chimney generates a suction and induces a rapid evacuation of the smoke to prevent smoke from the smoke of smoke due to the bad fireplace.Not only will smoke be evacuated quickly, but it also offers excellent performance.
• * Easy to install, very silent, suitable for most types of fireplaces and does not require professional technicians for installation.
• * When installing or withdrawing, unplug the power supply to avoid electric shocks.Install the power cord with at least 0.5 square copper wire.