YUCHENGTECH 0-100μm Grindometer Hegman Gauge Single Groove Stainless Steel Fineness Gage Gauge Single-Channel Grind Fineness Gauge Gage 25um,50um,100um,150um Available (100µm 1:1000) (100µm 1:1000)

Product Introduction The product is made of stainless steel (molybdenum vanadium), which is designated by the state. It is used to measure the size and dispersion degree of pigments and impurities in paints, paints, inks and other liquids and slurry, so as to control the quality of dispersed products in production, storage and application. Operation method： 1.Pour the test material into the bottom of the Grind fineness Gauge Gage. 2.Select the appropriate angle of the doctor blade and press it longitudinally to the fineness plate at a steady speed. 3.Sufficient downward pressure should be applied on the blade to clean the surface of abrasive particles while filling the groove with particles. 4. By observing the fineness plate, write down the determined grinding fineness immediately. 5. When the material in the groove shows significant spots again, note the scale number of particles between 5 and 10 in the 3mm wide groove. 6. Clean the fineness plate immediately after using. Parameters: 1.Block size: 155*50*13mm 2.Groove size: 13*120 QXD---25um 1:4000 QXD---50um 1:2000 QXD---100um 1:1000 QXD---150um 1.5:1000 3.Scale Value:5um 4.Scraper size:68*40*6mm 5.Currency: (1) Scraper plane straightness:0.002mm (2)Groove plane straightness:0.003mmmm (3):Scrape edge plane straightness:0.002mm 6. Material: stainless steel

• 1.This product is used to detect the fineness of dispersed products in the process of production, storage and application.(Please refer to the installation video below the product description.)
• 2.Stainless steel material, hard and wear-resistant, anti-rust and anti-corrosion.
• 3.Clear and accurate calibration, convenient and intuitive reading.
• 4.Various specifications are available to meet your different needs.
• 5.In order to ensure the accuracy of measurement, please clean and maintain the product in time.