Zoeller 98-0001 115-Volt 1/2 Horse Power Model M98 Flow-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump … & 30-0181 PVC Plastic Check Valve, 1-1/2 Inch

Zoeller 98-0001 115-Volt 1/2 Horse Power Model M98 Flow-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump …Effluent or dewatering submersible pumps for septic tanks, low pressure pipe (LPP) and enhanced flow STEP systems.Zoeller's Flow-Mate Model M98 Cast Iron Submersible Sump/Effluent Pump features cast iron motor and pump housing, a cast iron switch case, and a cast iron base. All castings are cast iron class 25-30 with 25000# tensile strength. The M98 also features an engineered plastic vortex impeller. The Flow-Mate has a corrosion resistant powder coated epoxy finish. There are no sheet metal parts that will rust or corrode and no screens that will clog. The permanent slip capacitor motor is oil-filled and hermetically sealed. It features automatic reset thermal overload protection. The pump also includes a watertight neoprene square ring between the motor and the pump housing. The pump's upper and lower bearings are oil fed cast iron. The Flow-Mate's maximum temperature for effluent or dewatering is 130 Degree Fahrenheit. The entire unit is pressure tested after assembly. The pumps screws, guard, handle, arm and seal assembly are all made of stainless steel. The Flow-Mate includes a float operated submersible (NEMA 6) 2 pole mechanical switch. It also features a carbon and ceramic shaft seal. The pump's discharge is 1-1/2-Inch NPT. The major width of the Model M98 is 10-1/8-Inch. The major height is 12-Inch.Zoeller 30-0181 PVC Plastic Check Valve, 1-1/2 InchZoeller Pump Company’s Model 98 Sump Pumps can offer protection and prevent flooding after heavy rainfall or storms. Underneath your structure, pits collect water. If the water level reaches a certain point, automatic or manual settings on the machine can efficiently pump that water away from your property’s foundation. How often the pump runs depends on the amount of moisture in the space. A corrosion-resistant finish over cast iron construction provides incredible strength and durability, and stainless steel screws assembling the seal, arm, handle, and guard stave off rust. The pump uses a 1 ½-inch discharge pipe and can pass spherical solids up to ½ inch in diameter. The lack of screen keeps the unit running smoothly. We offer accessories such as alarm systems with simplex or duplex control panels designed to keep you informed about your sump pump’s water level. The alarm gives you peace of mind that your pump is operating as intended.When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability.

• Product 1: 1/2 HP pump for residential sump pits or septic tanks
• Product 1: Automatic model with integral float switch, 1½" discharge, passes 1/2" solids
• Product 1: Performance: 72 GPM at 5' head, shut-off: 23' TDH
• Product 1: All cast iron construction with stainless steel guard and handle
• Product 2: 1-1/2 slip x slip unions
• Product 2: Flapper bends over a radius to eliminate sharp 90-degree edges
• Product 2: Capable of vertical or horizontal installation
• Product 2: Slip x slip for 4.3 PSI (10 feet of head) at 130°F