Flexible Magnet Strip with White Vinyl Coating, 1/32" Thick, 2" Height, 200 Feet, 1 Roll

The flexible magnet strip is magnetic on one side and white vinyl coating on the reverse, and can be attached and easily repositioned on flat or slightly curved steel surfaces. The vinyl side can be written on directly with a wet-erase or permanent marker, or a pre-printed adhesive paper label can be attached. Strength rating is 14 pounds of pull per linear foot. The strip withstands temperatures from -15 to 160 degrees F and can be cut with scissors.Flexible magnets can be easily cut and shaped for a range of applications. They are produced by mixing powdered iron or ferrite with a rubber or plastic binder, and then extruding or rolling into the desired shape. Flexible magnets can have adhesive backing and be laminated with a printable vinyl coating. Flexible magnets are typically magnetized with multiple poles on one surface to generate a stronger holding force. High-energy flexible magnets can sometimes be used in place of ceramic materials if tight tolerances are not required. The application temperature range is determined by binder material properties.

• Flexible magnet strip is magnetic on one side and white vinyl on the reverse
• Attaches to flat or slightly curved steel surfaces and is easily repositioned
• Write directly on vinyl side or apply pre-printed adhesive-backed paper labels (sold separately)
• Strength rating is 14 pounds of pull per linear foot
• Withstands temperatures from -15 to +160 degrees F